C-THERM TCi, Operator'S Manual, Page: 116 / 138

TCi Operator Manual
110
Appendices
Appendix A: System Components and Accessories
Standard Components
-
C-Therm TCi Control unit
-
C-Therm TCi Software
- C-Therm TCi Sensor
- C-Therm TCi Sensor base
-
C-Therm TCi Manual
-
Laptop
- C-Therm TCi weight (brass, standard 500g)
- *Pyrex beaker (50mL) – for standard liquid and powder testing
- *Reference material kit (box) – LAF 6720 foam, Pyrex, Pyroceram, Phosphor Bronze,
distilled water.
-
*Contact Agents–Glycol and Wakefield Type 120 Thermal Grease (and putty knife)
-
Tuniq TR-1 Thermal Material Remover
- RTV test tabs – for user-based testing of chemical aggression towards the sensor RTV seal
- Power cable
-
USB to Serial cable
-
Pelican Case for transport
* Note that clients can order a base package with one or more material ranges and will receive
the appropriate reference materials and contacts agents.
Accessories
- Small Volume Test Kit for liquids and powders
-
Small Volume Test Kit with grounding cables for explosive powders
-
Additional C-Therm TCi sensor
- Extension Plate accessory – used for larger sample placement when testing upright.
- User Calibration Materials
- Thermal Chamber
-
Microsoft Office Package Upgrade
-
Comprehensive Extended Warranty
- FRV Sensor for fuel testing
- Additional Weight or Sensor Base
Services
-
Sample testing
- Chemical aggression testing
- Special calibration services – C-Therm can provide calibration ranges specific to a clients’
application
-
Onsite training – Users with a very broad range of materials and applications are
encouraged to get advanced training on the use of the C-Therm TCi.
- Special application developments – C-Therm’ experience can be used to create new test
methods for new materials or processes.
- Testing migration services – C-Therm can provide consulting to migrate off-line testing to on-
line processes, including on-line process control