
TCi Operator Manual
23
Step 3 – Enter the Cal Material Group name.
Step 4 – Click the + button to add a calibration material to the group.
Step 5 – Select a calibration material from the drop-down list.
Step 6 – Repeat steps 4 and 5 as needed to enter all calibration materials.
Step 7 – Select a diagnostic material from the drop-down list.
The diagnostic material is the material tested when the calibration is selected for a reference
material test.
Step 8 – Click the Save button.
3.10
Calibration Methods
Calibration methods contain the parameters used to calibrate sensors, including timing options,
power level, frequency, and calibration material group.
Note: Only user created calibration methods can be edited. Calibration methods are
created differently in the User Cal Wizard. Please see User Calibrations for more
information.
Step 1 – Open the Calibration Method table.
Click the Calibration option from the Manage menu, and Calibration Method option from the
Calibration submenu.
Step 2 – Click the Add button.
Summary of Contents for TCi
Page 1: ...C Therm TCi Operator Manual TH130041 Rev H...
Page 2: ......
Page 6: ...TCi Operator Manual vi...
Page 53: ...TCi Operator Manual 47 Step 3 Click the Import button...