
TCi Operator Manual
17
Step 3 – Enter the material group name.
Use the material group name to indicate the common characteristic of the materials to be
attached to the group. For example: lubricants, powders, liquids, or the material name (if different
grades are to be included in the group).
Step 4 – Click the Save button.
3.3
Material
A material is any substance tested. All tests on a particular material can be easily found by
searching for the material name. Entering a material name is not necessary to run a test;
however, the value of that test is put at risk if this information is not entered either before or after
the test is conducted and a material record must be specified in order to allow calculation of
indirect values. A default material name is included in the C-Therm TCi software and is all that is
required to perform a test. As more data is collected, the material name can be used to filter
data.
Step 1 – Open the material table.
Step 2 – Click the Add button.
Step 3 – Enter the material name.
Summary of Contents for TCi
Page 1: ...C Therm TCi Operator Manual TH130041 Rev H...
Page 2: ......
Page 6: ...TCi Operator Manual vi...
Page 53: ...TCi Operator Manual 47 Step 3 Click the Import button...