Burstner T-585 Instruction Manual Download Page 48

Page: 48 / 236

T-Modell - 04/05 - Ausgabe 08/04 - 201804286 - BUE-0006-04EN

Living

6.3.4

TV Cabinet (Variant 1 and 2)

The television console can be brought into the
desired position and fixed there.

Positioning:

Open TV cabinet.

Release the knob (Fig. 27,1 or Fig. 28,1).

Pull out extension (Fig. 27,2 or Fig. 28,2).

Move the swivel console to the desired posi-
tion.

Storing away:

Return TV unit into its initial position.

Push the extension (Fig. 27,2 or Fig. 28,2)
to the back and secure it with the knob
(Fig. 27,1 or Fig. 28,1).

Secure TV unit with retaining strap (not in-
cluded in the scope of delivery).

Close TV cabinet.

Fig. 27

TV cabinet (variant 1)

Fig. 28

TV cabinet (variant 2)

Before commencing the journey,
always lock the television in the
TV cabinet.

Summary of Contents for T-585













































































































































































































































Search results

Summary of Contents for T-585

Reviews:

Related manuals for T-585

Brands by name

Popular brands

Burstner T-585, Instruction Manual

Search results

Summary of Contents for T-585

Reviews:

Related manuals for T-585

Brands by name

Popular brands