Burstner T-585 Instruction Manual Download

Page: 60 / 236

T-Modell - 04/05 - Ausgabe 08/04 - 201804286 - BUE-0006-04EN

Living

6.6.6

Roman Shades for Wind-
screen, Driver’s Window and
Front Passenger’s Window

Closing:

Pull the guide (Fig. 52,1) for the roman
shade for the windscreen from the holder
(Fig. 52,2) above the windscreen.

Grasp the handle of the Roman shades and
draw carefully until the magnetic catch
keeps the Roman shades closed.

Opening:

Using the handle, carefully push back the
Roman shades.

Push the handle (Fig. 53,1) onto the cap
(Fig. 53,2). The Roman shade is secured.

If the roman shade of the windscreen is
open, press the guide (Fig. 52,1) into the
holder (Fig. 52,2).

Fig. 52

Roman shade for the windscreen

Fig. 53

Roman shade for the driver’s window/
front passenger’s window

Summary of Contents for T-585













































































































































































































































Search results

Summary of Contents for T-585

Reviews:

Related manuals for T-585

Brands by name

Popular brands

Burstner T-585, Instruction Manual

Search results

Summary of Contents for T-585

Reviews:

Related manuals for T-585

Brands by name

Popular brands