Burstner T-585, Instruction Manual

Page: 130 / 236

9
130
T-Modell - 04/05 - Ausgabe 08/04 - 201804286 - BUE-0006-04EN
Appliances
9.5.3 Refrigerator (Model RM 7655)
Volume
Model RM 7655: 150 l
The refrigerator is equipped with an automatic system to select the type of power (AES). The "AES"
automatically selects the optimal energy source and regulates the refrigerator operation. Manual op-
eration to select the type of power is neither required nor possible.
The "AES" selects from the following types of power:
z
Solar installation 12 V
z
230 V AC
z
12 V DC
z
Gas
Choosing the available energy source highest on the list.
High external temperatures and high humidity can cause drops of water to form on the metal frame
of the freezer compartment. This is why the refrigerator is equipped with a frame heater for the freez-
er compartment. If the temperature and humidity are high, switch on the frame heater by pressing
the button (Fig. 126,1). This prevents corrosion. If the frame heater is switched on, the indicator lamp
(Fig. 126,2) will be lit.
230 V operation
If the 230 V power supply is connected this
power source is selected as the first priority by
the "AES".
12 V operation
12 V operation is only selected by the AES if the
vehicle’s engine is running and the alternator
supplies sufficient 12 V operating power.
Fig. 126 Operating controls for refrigerator
1 Frame heater button
2 Indicator lamp
3 Energy selector switch
4 Indicator lamps
5 Indicator lamps
6 Control knob for setting the temperature
V
Never let gas escape unburned due to danger of explosion.
V
If the frame heater is switched on, it will always consume current. Therefore, switch off
the frame heater if the vehicle engine is off and the vehicle is not connected to the
230 V power supply.
V
Even when the 12 V power supply is switched off, a small electrical power flows which
puts an extra load on the battery of the living area. Always switch off the refrigerator
for a temporary lay-up.