Burstner T-585, Instruction Manual

Page: 76 / 236

7
76
T-Modell - 04/05 - Ausgabe 08/04 - 201804286 - BUE-0006-04EN
Gas Fittings
V
Regularly inspect the gas tube fitted to the gas bottle connection for tightness. The
gas tube must not have any tears and must not be porous. Have the gas tube re-
placed in an authorised workshop no later than ten years after the manufacturing
date. The operator of the gas fittings must see to it that the parts are replaced.
V
Due to its function and construction, the gas bottle compartment is a space which is
open to the exterior. In order to enable leaking gas to immediately be dispersed out-
side, the standard forced ventilation is never to be blocked or covered.
V
Do not use the gas bottle compartment for storage.
V
Lock the gas bottle compartment in order to prevent unauthorised persons opening it.
V
The regulator tap on the gas bottle must be accessible.
V
Only connect gas-operated devices (e. g. gas barbecue) which have been designed
for a gas pressure of 30 mbar.
V
The exhaust pipe must be fitted tightly to the heating system and to the chimney and
must be sealed. The exhaust gas pipe must not show any evidence of damage.
V
Waste air must be able to leave and fresh air must be able to enter unhindered. For
this reason, no snow walls or aprons must be allowed to lie against the vehicle. Keep
the intake openings under the floor of the vehicle open and clean.