btsr SMART 200 TSS, Operating Manual

Page: 55 / 93

Operation
SMART 200 TSS -3.39 -
NEW - Creating a New Article
SETUP #
# #
# NEW
This function allows creating a new article and associating to such article the
quality control parameters that will be used by TS5.. sensors during the processing
phase of the article itself. For each parameter you will have to program the values
summarized in the following table (the values into brackets [..] are the default
ones).
Article………………. TENS 0.1…1000.0 [default 5.0 gr.]
Parameter
ERROR% TIME
TENS H +1…+300% [d30%] 10…5000ms [default 100 ms]
TENS L -1…-300% [default -30%] 10…5000ms [default 100 ms]
PEAK H +1…+300% [d50%] 0.5…100.0ms [default 10.0ms]
PEAK L -1…-300% [default -50%] 0.5…100.0ms [default 10.0ms]
NOYARN -1…-100% [default -75%] 10…5000ms [default 10.0ms]
Once you have selected the SETUP
!
NEW function you are prompted to enter
the name of the new article. Type the name using to set the
characters and use to move the cursor.
If you enter a name already existing, the warning message DOUBLE NAME will
be displayed. In this case press and enter a new name.
B