btsr SMART 200 TSS, Operating Manual

Page: 73 / 93

Operation
SMART 200 TSS -3.57 -
PRINT REPORT - Production Report Printing
CONTROL #
# #
#
PRINT? REPORT
This function allows you to print a report containing the summary of TENS, TENS
H, TENS L, PEAK H and PEAK L, NOYARN fault counters for each machine
position.
During the counter visualization phase, pressing the key, you will have
access to the PRINT? REPORT function
Press
to acces the function.
xxx = First sensor (position) to be included in the report
yyy = Last sensor (position) to be included in the report
L = Machine Side (either A or B) if the SIDE function is active
Select the desired range, using , ,
3 sec = to select the desired machine side (either A or B), if the SIDE
function is enabled.
Once you have selected the desired positions, press
, to start the printout
This screen indicates that the printout is in progress.
When the printing is completed, the REPORT xxx, yyy screen will re-appear,
allowing you to select a new sensor range for report printing.
In case of communication error between SMART 200 TSS terminal and printer, an
ERR_COM PRINTER error message will appear.
At the end press once
to leave the function and return to screen or two times
to return to Main Menu.
L