
Technical data and installation
SMART 200 TSS
- 2.1 -
2
2
2
2 –––– TECHNICAL DATA AND INSTALLATION
TECHNICAL DATA AND INSTALLATION
TECHNICAL DATA AND INSTALLATION
TECHNICAL DATA AND INSTALLATION
Technical Features
SMART 200 TSS Terminal
Power supply voltage
24 Vdc ± 10%
Maximum Absorption
100 mA
Dimensions
135 x 95 x 40 mm
Temperature range
10° - 60 °C
LCD graphic Display
80 x 40 mm
Integrated Touch-pad
5 membrane buttons with integrated red LED
Protection
2 fuses 5 x 20 – 1A
TS5.. Sensors
Power supply voltage
12 .. 24 Vdc ± 20%
Absorption 30
mA
(max 50 mA)
ENABLE input logic
Programmable (NO - NC)
STOP output
NPN open collector
STOP output logic
Programmable (NO - NC)
Analogue Output
0 – 5 Vdc
"Auto-calibration" function
Auto-calibration of sensor
STOP output protection
Protection against over-voltages and short-circuits
STOP output max current
200 mA continuous; 500 mA peak
Activation delay
Programmable from 1 to 250 sec
Signalling
With integrated LED’s
Dimensions
50 x 25 x 12,5 mm
Temperature range
10° - 60 °C
Installation
The installation of the
SMART 200 TSS
system depends on the type of application
and on the number of sensors to be connected. When the number of sensors is
limited, it is possible to connect them directly to the
SMART
terminal, otherwise
it is necessary to use a stabilized power supply
PSU 10A
. This is capable of
supplying up to 8 independent backbone lines to which it is possible to connect
several sensor chains
(up to a maximum of 100 sensors)
. The number of sensors
may be extended to 200, using two
PSU 10A
power supplies.
Summary of Contents for SMART 200 TSS
