btsr SMART 200 TSS, Operating Manual

Page: 53 / 93

Operation
SMART 200 TSS -3.37 -
VERS – UPG - Test of software version and Sensor’s version Updating
SETUP #
# #
#
CONFIG
#
# #
# TEST #
VERS-UPG
This function allows you to check the software version on each individual sensor,
with the possibility to update the version, if needed.
The updating procedure is effective only if all the sensors have a software version
≥ 2.0 and it must be carried out only if strictly necessary, for instance upon
indication of your BTSR distributor.
Press until the TEST CONFIG menu option is displayed.
Press
to have access to the Test function.
Press until the VERS TEST menu item appears.
Press
to continue.
DEV XXX
(or D XXX A if the SIDE option is enabled) = Number of TS5.. device
n.n= Software version loaded on XXX device
Press to select, in sequence, all the connected devices and check the
software version loaded
Press to switch from Side A to Side B and vice versa.
Press to return to the VERS TEST screen.
Press to select the UPG TEST menu item.
Press
to access the updating procedure
This screen means that the software updating procedure on TS5.. devices is in
progress
n.n = Software version that will be loaded on xxx to yyy device range
n.n = Software version that will be loaded on xxx to yyy device range, machine
side A
Press and hold down for 3 seconds to switch from Side A to Side B and vice
versa.
A
16