btsr IS3, Operating Manual

Page: 16 / 71

Operating
- 3.2 - SMART 3000TW
3. NEXT CY button
During the parameters setting phase, within a programming menu, it allows you to
increase the numeric value of current filed. If it is kept continuously pressed, the
numeric field increases more quickly.
When the system is in control condition
(CONTROL nnnn displayed and red Led
on, inside the CONTROL button), pressing the NEXT CY button activates the
NEXT CYCLE function:
-
The system is disabled for a complete control cycle
- The red Led inside CONTROL button turns OFF
- The red Led inside NEXT CY button turns ON.
When alphanumeric data are entered (for instance the Key_cod or K_learn), this
button allows the increase of characters pointed by the cursor, according to the
following cyclic sequence:
4. CONTROL button
During the programming phases requiring the entry of 2 or more parameters within
the same screen shot, pressing the CONTROL button switches from the current
parameter
(indicated by blinking cursor), to the next parameter (cyclic function).
5. REPEAT button
During the parameters setting phase, within a programming menu, it allows you to
decrease the numeric value of current field. If it is kept continuously pressed, the
numeric field decreases more quickly.
When alphanumeric data are entered
(for instance the Key_cod or K_learn), this
button allows the decrease of characters pointed by the cursor, according to the
following cyclic sequence:
Meaning of Red Leds inside the SMART 3000TW Terminal
During normal operation, the SMART 3000TW terminal signals the current
working condition through the status of Leds embedded in the five function
buttons. The meaning of Leds is the following:
ENTER LED
If switches on and off alternatively, each time the system
receives a synchronism signal
(PRX).
NEXT CYCLE LED
It switches on when the NEXT CYCLE function is activated
(next cycle).
CONTROL LED
It is On when the system runs the Control phase.
It is Off when the system runs the Learn phase.
REPEAT LED
It switches on when the RESET signal is active (ON).
RESET LED
It is On when the machine is stationary.
It is Off when the machine is running.