btsr IS3, Operating Manual

Page: 17 / 71

Operating
SMART 3000TW - 3.3 -
6. Operator’s message Area:
The menu choices, or settings for the selected function during programming or
setup phase of the system as well as service messages are displayed here with large
size fonts
(1,5 x 0,8 cm), easy to read even from a distance, when the system is
running normally. In other words, this area shows all the necessary information to
guide the operator step by step through the programming phase and interactive
management of the system.
The presence of a flashing cursor
(---)
indicates the position where the operator
can enter a numeric value or variable setting which will replace the value currently
displayed.
7. Operating Status Signalling Area
To enable a more direct and evident interpretation of the operating context in
which you are working, on the right hand side and bottom side of the operator
message area, 16 rectangular boxes
(labels) are implemented. They display the
operating status of the system, and the hierarchic level of the menu at which you
are operating.
More specifically, the
PROGRAM label indicates that you are operating in one of
the following modes: configuration, programming or data transmission to the
sensors. The
CONTROL label indicates that the system is operating normally with
all monitor functions enabled, and according to the settings currently set in the
system. In this phase the message display indicates
CONTROL nnnn . The
ERROR label indicates that an error has been detected during normal operation of
the system. In this case the message display shows the type of error detected (for
further information please refer to Operating Sequences) .
The labels P1 .. P5 indicate the hierarchic level of the menu in which you are
operating.
The WAIT label indicates that the button you are pressing has a timed function, for
instance if you press ENTER while the system is in Control condition, the WAIT
label indicates that, if you keep the button pressed for 3 seconds you will access the
P1 menu.
SMART
3000TW