btsr IS3, Operating Manual

Page: 41 / 71

Operating
SMART 3000TW - 3.27 -
KEY_COD: Password to Access the Programming Menus
This function allows you to setup a secret code to access the programming
functions of the system.
Enter the code of your choice
(from 1 to 7 alphanumeric characters) using the
following buttons:
Increases the character where the cursor is positioned.
Decreases the character where the cursor is positioned.
Moves the cursor one position to the right.
Confirms and stores the code which has been set.
! If no code is entered, the function is disabled and you will not be asked for
an access code when entering the menus.
WARNING: If you set a password it will be necessary to enter it
each time you access P1 ÷ P4 and PX menus. If you forget the
access code it will be necessary to contact your BTSR reseller.
K_LEARN: Password to Access the Learning Function
To access the K_LEARN setting functions, press and hold for 3 seconds
while the display shows the last P1 menu item
(KEY_COD).
This function allows you to setup a secret code to access the learning functions
(LEARN).
Enter the code of your choice (from 1 to 7 alphanumeric characters) using the
following buttons:
Increases the character where the cursor is positioned.
Decreases the character where the cursor is positioned.
Moves the cursor one position to the right.
Confirms and stores the code which has been set.
! If no code is entered, the function is disabled and you will not be asked for
an access code when entering the menus.
WARNING: If you set a password it will be necessary to enter it
each time you access menu. If you forget the access code it will be
necessary to contact your BTSR reseller.