76
my Home - control
For the Programming the scenarios managed by device item MH200
must use the
TiMH200. program. This application can construct scenarios
(activation of light points, rolling shutters, etc.), dealing with time events or
events detected on the system (alarms, pressing pushbuttons, etc.).
In this mode the user can, for example, simulate that someone is at home
(setting that every day at a certain time the rolling shutters are raised and
that at another time the lights are switched on and the rolling shutters
lowered).
The scenarios created are grouped in a collection which is saved directly
in the design. The collection can save different scenarios and activate only
those involved.
configurAtion
scenario programmer item mH200
The design created must be then downloaded to the scenario Programmer.
This operation is performed by connecting the device to the PC with a “cross-
over” cable connected to the Scenario Programmer LAN network connector
and to the PC Ethernet network card or by means of cable item 3559.
In the same way, the file can be uploaded from the device to check the
configuration contained and saved in it. The TiMH200 program can update
the version of the MH200 device Basic permanent software by means of
new revisions distributed by BTicino (Firmware Update) and, if the scenario
is activated by control devices (configurators M=CEN), the association can be
made between the control key and the scenario itself.
connecting the scenario programmer to the Personal computer
Personal Computer
with TIMH200 software
MH200 scenario
programmer
Interface
item 3559
Ethernet
Cross-over
Cable
TIMH200 software
Main screen for definition
of the scenario
