56
my Home - control
virtuAl configurAtion
In systems with many devices the confi guration operations can be simplifi ed
considerably using the virtual confi guration kit item 3503 and a hand-
held computer with Wireless connection as an alternative to the manual
confi guration. This mode, called “virtual confi guration”, allows confi guring
each device without using the usual alphanumeric confi gurators. The device
address and operating mode are established with special software installed in
the hand-held computer and sent to the system via wireless by means of the
Kit connected to the bus; this mode is thus particularly advantageous in large
systems for modifying the confi guration at any time without having to act
manually on each device.
The virtual confi guration is applicable to all types of Automation system, either
individual or combined together in “logical extension” mode.
For more information, consult the documentation supplied with the item 3503 kit.
configurAtion
Main page of the VIRTUAL CONFIGURATOR program
Access the selection page of the device to be confi gured
Access the selection page of the device to check
Access the page which allows the test of an actuator
Access the page which checks the software options
Allows the management of the connection with the system.
Single system
rolling shutter
control
dimmer
control
fl ush-mounting
actuator
DIN dimmer
power supply
rolling shutter
control
DIN actuator
WiFi
Pocket PC
BUS
Automation system
NOTE: the hand-held computer is not supplied with the kit but must be purchased separately.
Pocket PC Requirements
•
Operating system Microsoft Windows Mobile
TM
•
300 Mhz Processor or higher
•
System memory: 64 Mb or higher
•
Secure Digital expansion Slot
(only for installation from SD Card)
•
Screen:
- Resolution 240x320 pixels or greater
- Colours 65.000 or more
•
Touch screen pointing device with pen
•
Wireless Wi-Fi technology
•
USB external communication port
(for the connection to the PC)
Kit 3503
BUS
230V a.c.
12V a.c.
