GENErAL ruLES FOr INSTALLATION
129
GENErAL ruLES FOr INSTALLATION
MY HOME COnTrOl TECHNICAL GUIDE
2
1
2
3
4
5
6
7
8
9
0
OK
1
2
3
4
5
6
7
8
9
0
OK
3
3
1
1
The dialling device can be installed in any room in the home, in an easily
accessible area for easy modification of settings or reading of events.
The dialling device can be installed on the wall using the fastening plate.
GENErAL ruLES FOr INSTALLATION- burglar-alarm control
unit with pSTN or GSM dialling device
Box 503
Telephone
line
SCS pair
Cable
fastening
hole
A
1
2
3
4
5
6
7
8
9
0
OK
1
2
3
4
5
6
7
8
9
0
OK
1
2
Fastening to the plate
To remove the dialling plate from
the plate lower the tab and push
upwards. A
Or flush-mounted in a Multibox switchboard
After establishing the exact point where the dialling device must be
installed set up the system; trunking for the passage of the cables for BUS
and telephone system, flush-mounting box and any finishings if installed in
MULTIBOx switchboards.
Before fastening it, make the connections as described in the technical
features – terminal board connection, insert and connect the back-up battery
in the compartment on the back and for installation in MULTIBOx move the
tamper jumper from -/T1 to - /T2.
Installation kit
complete
with surround
plates
Pair for BTicino BUS (item L4669S)
Flush-mounting
box
Telephone
line
NOTE: detailed information on the installation in Multibox switchboards can be
found in the instruction sheets with the switchboards themselves.
