43
D
45
VIDEO
DOOR
ENTR
Y SY
STEM
POWER
+
-
1 2 3 4
1 2 3 4
legenD
1 . BUS input connector .
2 . Branch 1 output connector .
3 . Branch 2 output connector .
1 2 3 4
1 2 3 4
on
oFF
Branch 1 V-GAIN switch
Branch 2 V-GAIN switch
2 Branches video splitter
323007 - 2 branches viDeo splitter
The device has one input and two outputs . It splits the
BUS signal into two channels: the video signal can only be
transferred from input to output . The video Splitter has
4 gears for video compensation functions . It can provide
compensation to two channels separately and make the
video signal output from EP adapt to different transfer
distances by setting different gears . It mainly use in riser
systems to divide the riser BUS into many channels to adapt
to the wiring in many low electricity wells . One building that
is particularly high will use 323007 to adjust video gains by
splitting in two channels . One channel will be used for lower
floors, the other is for higher floors . 323007 also can be used
for physically connecting the Switchboard and extend the
Switchboard interface . (in this case, if the Switchboard is
fitted with a camera, the video signal cannot be transmitted
to the handset) .
DIP switch setting instruction
Distance
1
2
3
4
colour signal
0 – 300 m
OFF
OFF
OFF
OFF
300 – 700 m
ON
OFF
OFF
OFF
700 – 1000 m
ON
ON
OFF
OFF
b/w signal
1000 –1500 m
ON
ON
ON
OFF
1500 – 2000 m
ON
ON
ON
ON
The instruction data in above table may be different
during actual installation .
1
2
3
Summary of Contents for D45
