Bticino D45, Technical Manual

Page: 101 / 156

99
D
45
VIDEO
DOOR
ENTR
Y SY
STEM
322010 - Digital entrance panel conFiguration
possible ep conFiguration moDes
Mode 1 Mode 2
Resistor configuration √ √
Keyboard configuration √ √
RS232 configuration √ √
meaning oF each conFigurator socket pin
posiTion Mode 1 Mode 2
N NN Mode 2= Mode 1
N
#FF is 20(default).
No need for configuration #FF
(
(use EP keyboard config or 323020
download config)
#II is 4(default).
No need for configuration use EP keyboard config or 323020
download config)
NN: the number for the main EP, the number range is from
1 to 80, which means that the maximum main EP in riser is
80 (default value: 1) .
#FF: typical floors per riser
#II: typical number of handsets per floor
conFigurators position For ep
Example (A):
EP address is 5, each riser has 20 floors, and each floor has 4
handset: system configuration mode 1 is used .
The Switchboard directly connected to the main EP is no . 2,
main EP configuration should be as follows:
posiTion value For conFiguraTor reMarks
N 0 0
N 5
#F
#FF is 20(default).
No need for configuration
#F
#I
#II is 4(default).
No need for configuration
#I
c 2This position can use the EP keyboard or the configuration tool for the
configuration.
Note:the other configuration position c is for setting the Switchboard address
number that will communicate with the EP directly. The configuration position c
can only be configured using the EP keyboard or the configuration tool software. (c
default value: 0; this means that the Switchboard that will communicate with the
EP is No.0)
a
N N #F #F #I #I
0 5
N N #F #F #I #I
EP configuration examples