Bticino D45, Technical Manual

Page: 110 / 156

108
VIDEO DOOR ENTRY SYSTEM - CONFIGURATION
D45
323009 - apartment interFace
Code for the configuration place
Meaning of the configuration place
conFiguraTion place Mode 1 Mode 2 direcTions
CF1
FF FF FF is the Device floor number (Tens at the front)
CF2
CF3
II II II means the Device household number (Tens at the front)
CF4
CF5
#II
#If we have four households on each floor (tens at the front): #II is for 0 (or no configuration resistor), the default is 4 households. The building
is 20floors.
CF6
For 4 houses on each floor and a total of not more than 20 floors, you can configure as per Mode 1 (The floor number is from 1
to 20 and the room number is from 1 to 4); otherwise use mode 2 for the configuration .
example:
Note: The configuration value in the following example can be configured with either the configurator or serial RS232.
n
A . Apartment interface . There are 20 floors in the 323009 unit, with four houses on each floor . When the house number is
1204, 323009 can be configured as per Mode 1 .
conFiguraTion place conFiguraTion value reMarks conFiguraTion diagraMs
CF1
1
FF=12
F F I I #I #I
1 2 0 4 0 0
CF2 2
CF3 0
II=04
CF4 4
CF5 0 #II is configured as 0 and the system will default the
house number at each floor as 4.
CF6
0
n
B . If the room number at item 323009 is 1206, and the house number on each floor is 8, then device must be configured as
per Mode 2 .
conFiguraTion place conFiguraTion value reMarks conFiguraTion diagraMs
CF1 1
FF=12
F F I I #I #I
1 2 0 6 0 8
CF2 2
CF3 0
II=06
CF4 6
CF5 0
#II=08
CF6
8
Accessory configuration examples