Bticino D45, Technical Manual

Page: 30 / 156

SONORA - CARATTERISTICHE GENERALI
28
VIDEO DOOR ENTRY SYSTEM - GENERAL FEATURES
D45
FuncTions operaTion reMarks
Select the “Set master and slave
handsets” setup submenu While in the initial installation setup status, press and hold the MC pushbutton 8 times to enter the setup submenu
“Set master and slave handsets” Read the current parameter. For master handsets the parameter is 1 and the message
light will be on. For slave handsets the parameter is 0 and the message light will be off. Note: only one master handset per household
number is allowed. All the other handsets should
be set to slave.
Default:
slave handset
Set the parameters
Press the MC pushbutton to increase the parameter by 1. The parameter will return to 0 after it reaches to 2. When
parameter is 1, the handset is a slave handset, and the message light is on. When the parameter is 0, the handset is a
master handset and the message light will be off. During setup the parameter will be saved automatically.
Exit 1) Press the door lock release pushbutton to exit the current submenu and return to the initial installation setup status.
2) If the operation is performed wrongly, 3 short beeps will be heard the unit will automatically return to the initial
installation setup status.
FuncTions operaTion reMarks
Select setup submenu for the doorbell
function While in the initial installation setup status, press and hold the MC pushbutton six times to enter the setup submenu
for enabling the doorbell function. Read the current parameter. If it’s enabled, the parameter is 1 and the message light
will be on. If it’s disabled, the parameter is 0 and the message light will be off.
Default: disabled. This apply to the Small EP
function and not to the doorbell function.
Set the parameter Press the MC pushbutton to increase the parameter by 1. The parameter will return to 0 after it reaches to 2. When
parameter is 1, the handset able to use the doorbell function, and the message light is on. When the parameter is 0,
the handset is unable to use the doorbell function, and the message light is off. During setup the parameter will be
saved automatically.
Exit
1) Press the door lock release pushbutton to exit the current submenu and return to the initial installation setup status.
2) If the operation is performed wrongly, 3 short beeps will be heard the unit will automatically return to the initial
installation setup status.
FuncTions operaTion reMarks
Select setup submenu for enabling
connection to item 323009
While in initial installation setup status, press and hold the MC pushbutton three times to enter the setup submenu for
enabling connection to item 323009. Read the current parameter. If it’s enabled, the parameter is 1 and the message
light will be on. If it’s disabled, the parameter is 0 and the message light will be off. Default: disable. this means that the handset is
not set to connect to item 323009
Set the parameter Press the MC pushbutton to increase the parameter by 1. The parameter will return to 0 after it reaches to 2. When
parameter is 1, the handset is set to connect to the apartment interface, and the message light is on. When parameter
is 0, the handset is not set to connect to the apartment interface, and the message light is off. During setup the
parameter will be saved automatically.
Exit 1) Press the door lock release pushbutton to exit the current submenu and return to the initial installation setup status.
2) If the operation is performed wrongly, 3 short beeps will be heard the unit will automatically return to the initial
installation setup status.
Note: The handset can communicate with the 323009 device when powered up or set to do so. Based on the communication result, the handset can change the setting
parameter. If the handset is to be connected to item 323009, then the handset number will be changed to 101 automatically.
322040 - auDio master anD slave hanDset
To install doorbell function the two steps below need to be
completed:
1 . Connect SMALL EP connections R2 and R3 to the doorbell
switch .
2 . Before using doorbell function, the setup procedure must
be completed .
Indoor handset functions overview