![background image](http://html.mh-extra.com/html/bticino/d45/d45_technical-manual_2825385028.webp)
SONORA -
CARATTERISTICHE GENERALI
26
VIDEO DOOR ENTRY SYSTEM -
GENERAL FEATURES
D45
Set the installation parameters
Set the handset household no .
FuncTions
operaTion
reMarks
Enter the household number setup
submenu
While in the initial installation setup status press and hold down the MC pushbutton once to enter the household
number setup submenu. Note: the first number to set after entering the submenu is the thousand position.
Household number range is 101-9999. Default
number is 101.
The two numbers after 101 cannot be higher than
the number of households per floor.
Set the parameter
Press the MC pushbutton to add 1 unit to the relevant position. If the pushbutton is pressed after the input parameter
has reached 10, 3 short beeps will indicate wrong operation and the device will exit the household number setup
submenu automatically and return to the initial installation setup status.
Select the setting and exit the setup
submenu
Press the door lock release pushbutton to move to next setting position, the order is: thousands, hundreds, tens and
units. Note:
1) If no number is entered in a position, the default 0 will apply.
2) After setting the units position press the door lock release key to exit household number setup and return to the
initial installation setup status. If the household number is set correctly, a long beep will be heard when exiting the
menu, and the number will be saved; otherwise, 3 short beeps will be heard and the number will be not saved
Exit
1) Press the door lock release pushbutton to move to the last item. Press the door lock release pushbutton again to exit
household number setup and return to the initial installation setup status.
2) If the operation is performed wrongly, 3 short beeps will be heard the unit will automatically return to the initial
installation setup status.
example:
If the household number must be set to 403, then the relative
parameter should be: 0 for thousands, 4 for hundreds, 0 for tens
and 3 for units.
While in the initial installation setup status press and hold
down the (MC) Switchboard call key once to enter the
household number setup submenu . The current position
is thousands Since the parameter for thousands is 0, press
the door lock release pushbutton to move to the hundreds
position . The parameter for the hundreds is 4, press the (MC)
Switchboard call key 4 times, then press door lock release
pushbutton to move to the tens . Since the parameter for
322040 - auDio hanDset
F F I
I
tens is 0, there no need to press the (MC) Switchboard call
key, just press the door lock release pushbutton to move to
the units . Since the parameter for the units is 3, press the
(MC) Switchboard call key 3 times . Then press the door
lock release key to return to the initial installation setup
status and check at the same time if the settings entered
are correct . If they are correct, 1 long beep will be heard .
Otherwise 3 short beeps will be heard . Once in the initial
installation setup status press and hold the door lock release
pushbutton to exit setup status and return to standby status .
Indoor handset functions overview
Summary of Contents for D45
