manualshive.com logo in svg

Brother HL-L5000D, User Manual

Share
Download
Brother HL-L5000D User Manual Download Page 35

 Home > 

Paper Handling

 > 

Load Paper

 > Load and Print Using the Multi

‑

purpose Tray (MP Tray)

Load and Print Using the Multi

‑

purpose Tray (MP Tray)

You can load up to ten envelopes, letterhead, coloured paper, thin or thick paper, recycled paper, Bond paper,
labels, or up to 50 sheets of plain paper in the MP tray.

•

Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper, Recycled Paper and Bond Paper in the
MP Tray

•

Load and Print Thick Paper and Labels Using the MP Tray

•

Load and Print on Envelopes Using the MP Tray

•

Printing Problems

•

Error and Maintenance Messages

30

Summary of Contents for HL-L5000D




































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands