Brother HL-L5000D User Manual Download Page 303

Page: 303 / 387

Home >

Routine Maintenance

Clean the Machine

> Clean the Corona Wire

Clean the Corona Wire

If you have print quality problems or the control panel displays

[Drum !]

status, clean the corona wire.

1. Open the front cover.

2. Remove the toner cartridge and drum unit assembly from the machine.

3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left

several times.

Be sure to return the tab to the Home position (

). The arrow on the tab must be aligned with the arrow on

the drum unit. If it is not, printed pages may have a vertical stripe.

4. Install the toner cartridge and drum unit assembly back into the machine.

5. Close the front cover of the machine.

Related Information

•

Clean the Machine

•

Error and Maintenance Messages

298

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands