Brother HL-L5000D User Manual Download Page 56

Page: 56 / 387

Option for Landscape Description

Short Edge (Right)

Short Edge (Left)

7. Select the

Binding Offset

check box if you want to specify the offset for binding in inches or millimetres.

8. Click

9. Change other printer settings if needed.
10. Do one of the following:

•

For automatic 2-sided printing, click

again, and then complete your print operation.

•

For manual 2-sided printing, click

again and follow the on-screen instructions.

If the paper is not feeding correctly, it may be curled. Remove the paper, straighten it, and put it back in the paper
tray.

Related Information

•

Print from Your Computer (Windows

)

•

Print Settings (Windows

)

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands