Brother HL-L5000D User Manual Download Page 306

Page: 306 / 387

12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off.

NOTE

DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids.

13. Put the toner cartridge firmly into the drum unit until you hear it lock into place.

Make sure you put the toner cartridge in correctly or it may separate from the drum unit.

14. Install the toner cartridge and drum unit assembly back into the machine.

15. Close the front cover of the machine.

16. Press

to turn the machine on.

HL-L6400DW

1. Make sure the machine is in Ready Mode.

2. Press

[Settings]

[Machine Information]

[Drum Dot Print]

3. Press

[OK]

The machine prints the Drum Dot Check Sheet.

4. Press and hold

to turn the machine off.

5. Open the front cover.

301

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands