Brother HL-L5000D User Manual Download Page 237

Page: 237 / 387

You can also confirm the error status on the LCD of your machine.

9. Click

Submit

to display the

Test Print Log to Network

page.

To test your settings, click

Yes

and then go to the next step.

To skip the test, click

. Your settings will be submitted automatically.

10. The machine will test your settings.
11. If your settings are accepted,

Test OK

appears on the screen.

Test Error

appears, check all settings, and then click

Submit

to display the Test page again.

Related Information

•

Store Print Log to Network

232

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands