manualshive.com logo in svg

Brother HL-L5000D, User Manual

Share
Download
Brother HL-L5000D User Manual Download Page 271

Examples of poor print quality

Recommendation

Curled or wavy

•

Check the paper type and quality. High temperatures
and high humidity will cause paper to curl.

•

If you do not use the machine often, the paper may
have been in the paper tray too long. Turn over the
stack of paper in the paper tray. Also, fan the paper
stack, and then rotate the paper 180° in the paper
tray.

•

Open the back cover (face up output tray) to let the
printed paper exit onto the face up output tray.

•

Choose 

Reduce Paper Curl

 mode in the printer driver

when you do not use our recommended print media.

Wrinkles or creases

•

Make sure paper is loaded correctly.

•

Check the paper type and quality.

•

Turn over the stack of paper in the tray or rotate the
paper 180° in the input tray.

Poor fixing

•

Make sure the media type setting in the driver
matches the type of paper you are using.

•

Choose 

Improve Toner Fixing

 mode in the printer

driver.
If this selection does not provide enough
improvement, change the printer driver setting in

Media Type

 to a thick setting. If you are printing an

envelope, choose 

Env. Thick

 in the media type

setting.

ABCDEFG

EFGHIJKLMN

Envelope creases

•

Make sure envelopes are printed with the back cover
(face up output tray) opened.

•

Make sure envelopes are fed only from the MP tray.

  Related Information

•

Troubleshooting

•

Test Print

•

Clean the Drum Unit

 

266

Summary of Contents for HL-L5000D




































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands