Brother HL-L5000D User Manual Download Page 10

Page: 10 / 387

Important Note

•

Do not use this product outside the country of purchase as it may violate the wireless telecommunication and
power regulations of that country.

•

Not all models are available in all countries.

•

Windows

XP in this document represents Windows

XP Professional, Windows

XP Professional x64

Edition and Windows

XP Home Edition.

•

Windows Server

2003 in this document represents Windows Server

2003, Windows Server

2003 x64

Edition, Windows Server

2003 R2 and Windows Server

2003 R2 x64 Edition.

•

Windows Server

2008 in this document represents Windows Server

2008 and Windows Server

2008 R2.

•

In this User's Guide, the LCD messages of the HL-L5100DN/HL-L5200DW are used unless otherwise
specified.

•

In this User's Guide, the illustrations of the HL-L6400DW are used unless otherwise specified.

•

Unless otherwise specified, the screens in this manual are from Windows

7 and OS X v10.9.x. Screens on

your computer may vary depending on your operating system.

•

Not all features are available in countries subject to applicable export restrictions.

Related Information

•

Before You Use Your Brother Machine

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands