Brother HL-L5000D User Manual Download Page 17

Page: 17 / 387

HL-L6400DW

1. Touchscreen Liquid Crystal Display (LCD)

Access menus and options by pressing them on the Touchscreen.

Power On/Off

•

Turn the machine on by pressing

•

Turn the machine off by pressing and holding down

. The LCD displays

[Shutting Down]

for a few

seconds before going off.

3. Touchpanel

(Back)

Press to go back to the previous menu.

(Home)

•

Press to return to the Home screen.

•

While the machine is in Sleep Mode, the Home icon blinks.

(Cancel)

•

Press to cancel an operation (available when lit).

•

Press to cancel a programmed print job and clear it from the machine’s memory. To cancel multiple
print jobs, hold down

until the LCD displays

[Cancel All Jobs]

Press to display the previous or next page.

(WiFi)

(For infrastructure mode)
When the

WiFi

light is on, your Brother machine is connected to a wireless access point. When the

WiFi

light

blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access
point.

Summary of Contents for HL-L5000D



































































































































































































































































































































































































Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands

Brother HL-L5000D, User Manual

Search results

Summary of Contents for HL-L5000D

Reviews:

Brands by name

Popular brands