manualshive.com logo in svg

Brother HL-L5000D, User Manual

Share
Download
Brother HL-L5000D User Manual Download Page 322

 Home > 

Machine Settings

 > 

Change Machine Settings from the Control Panel

 > 

General Settings

 > Set

Sleep Mode Countdown

Set Sleep Mode Countdown

The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine
must be idle before it goes into Sleep Mode. The Sleep Mode timer is reset when the machine receives a print
job.

When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when
it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep
Mode.

>> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW
>>  HL-L6400DW

HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW

1. Press 

a

 or 

b

 to select the 

[General Setup]

 option, and then press 

OK

.

2. Press 

a

 or 

b

 to select the 

[Ecology]

 option, and then press 

OK

.

3. Press 

a

 or 

b

 to select the 

[Sleep Time]

 option, and then press 

OK

.

4. Press 

a

 or 

b

 to enter the length of time, in minutes, that the machine should remain idle before entering Sleep

Mode.
Press 

Go

.

HL-L6400DW

1. Press 

 

[Settings]

 > 

[General Setup]

 > 

[Ecology]

 > 

[Sleep Time]

.

2. Enter the length of time (maximum 50 minutes) the machine will remain idle before entering Sleep Mode, and

then press 

[OK]

.

3. Press 

.

  Related Information

•

General Settings

 

317

Summary of Contents for HL-L5000D




































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands