Brother DCP-L3510CDW Service Manual Download Page 147

Page: 147 / 430

2-111

Confidential

4.2.9 Paper jam

■

Paper jam at the T1

<User Check>

• Check that the paper is set in the T1 correctly.

• Flip over the paper in the T1 or rotate the paper 180°.

• Adjust each paper guide according to the paper size.

• Check that there is not too much paper set.

• Check that the thickness of the paper is 60 to 163 g/m

• Flip through the paper and reset it in the T1.

Step

Cause

Remedy

Foreign object around the T1

Remove the foreign object.

Paper dust cleaning roller
attachment failure

Reattach the paper dust cleaning roller.

Paper feed actuator coming off

Reattach the paper feed actuator.

Registration front actuator
coming off

Reattach the registration front actuator.

Connection failure of the manual
feed paper empty/regist rear/
regist front sensor harness

Reconnect the manual feed paper empty/
regist rear/regist front sensor harness.

Connection failure of the
registration clutch harness

Reconnect the registration clutch harness.

Connection failure of the T1
paper empty/paper feed sensor
harness

Reconnect the T1 paper empty/paper feed
sensor harness.

Damaged gears in the paper
feed drive unit

Replace the paper feed drive unit.

Paper feed motor failure

Replace the process drive unit.

Paper feed unit failure

Replace the paper feed unit.

Damaged fuser unit

Replace the fuser unit.

Main PCB failure

Replace the main PCB.

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Search results

Summary of Contents for DCP-L3510CDW

Reviews:

Related manuals for DCP-L3510CDW

Brands by name

Popular brands

Brother DCP-L3510CDW, Service Manual

Search results

Summary of Contents for DCP-L3510CDW

Reviews:

Related manuals for DCP-L3510CDW

Brands by name

Popular brands