manualshive.com logo in svg

Brother DCP-L3510CDW, Service Manual

Share
Download
Brother DCP-L3510CDW Service Manual Download Page 76

2-40

Confidential

Toner Low: M -

Dot counter of the toner 
cartridge (magenta) or develop 
roller counter reaches the upper 
limit soon.

4B03

2-74

Toner Low: Y

-

Dot counter of the toner 
cartridge (yellow) or develop 
roller counter reaches the upper 
limit soon.

4B02

2-74

Unusable 
Device

Remove the 
Device. Turn the 
power off and back 
on again

Overcurrent was caused 
because a USB device that did 
not meet the specifications was 
inserted into the USB port.

EC00 2-105

-

A USB device that did not meet 
the specifications was inserted 
into the USB port.

---

4.14.2

Update 
Fail:05

Check the firmware 
update file and try 
again.

Failed to analyze the firmware 
during the automatic firmware 
update with USB flash memory.

---

4.14.3

Update 
Fail:06

Check the firmware 
update file and try 
again.

There is a file that contains 
more than 119 words in “FIRM” 
folder during the automatic 
firmware update with USB flash 
memory.

---

4.14.3

Update 
Fail:07

Check the firmware 
update file and try 
again.

There is a firmware not for the 
machine model during the 
automatic firmware update with 
USB flash memory.

---

4.14.3

Update 
Fail:08

Check the firmware 
update file and try 
again.

Unable to update the firmware 
because other function is 
working during the automatic 
firmware update with USB flash 
memory.

---

4.14.3

Wrong Paper 
Size

Reload correct 
paper in the MP 
Tray or press Start.

When printing from the MP tray, 
the size of paper set in the MP 
tray does not match the size 
specified by the driver.

---

4.14.1

Reload correct 
paper in Tray 1 or 
press Start.

When printing from the T1, the 
size of paper set in the T1 does 
not match the size specified by 
the driver.

---

4.14.1

Error message

Description

Error 

codes

Refer 

to:

First line

Second line

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands