manualshive.com logo in svg

Brother DCP-L3510CDW, Service Manual

Share
Download
Brother DCP-L3510CDW Service Manual Download Page 335

5-7

Confidential

1.3.4 Monochrome print quality test pattern (Function code 09)

< Function >

This function is used to print test patterns to check any missing image and print quality.

< Operating Procedure >

(1) For models with touch panel 

Press the [0], and then the [9] in the initial state of maintenance mode. “MAINTENANCE 
09” is displayed on the LCD, and the machine starts printing the monochrome print quality 
test pattern (refer to the figure below).

For models without touch panel

Press the [

▲

] or [

▼

] in the initial state of maintenance mode to display 

“MAINTENANCE 09” on the LCD, and press the [OK]. “MAINTENANCE 09” is 
displayed on the LCD, and the machine starts printing the monochrome print quality test 
pattern (refer to the figure below).

(2) When printing is completed, the machine returns to the initial state of maintenance mode.

Fig. 5-1

Note: 

This print is available even Cyan, Magenta and Yellow toner cartridge is empty or “No toner” status.

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands