manualshive.com logo in svg

Brother DCP-L3510CDW, Service Manual

Share
Download
Brother DCP-L3510CDW Service Manual Download Page 428

App.2-1

Confidential

APPENDIX 2 DELETING USER SETTING 

INFORMATION

The user setting information for the machine is stored in the main PCB. You can return this to 
the default settings by following the procedure below.

<Operating Procedure>

HL-L3290CDW/DCP-L3551CDW (For models without touch panel)

(1) Press the [Menu].

(2) Press the [

▲

] or [

▼

] to display the “Initial Setup” option, and then press the [OK].

(3) Press the [

▲

] or [

▼

] to display the “Reset” option, and then press the [OK].

(4) Press the [

▲

] or [

▼

] to choose the type of Factory Reset you want to perform, and then 

press the [OK].

(5) Press the option in the table to reset the machine or to exit the process.

The LCD displays “Reboot OK?”.

(6) Press the option in the table to reboot the machine or to exit the process.

MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW (For models with touch panel)

(1) Press the 

 [Settings] > [All Settings] > [Initial Setup] > [Reset] > [Factory Reset].

(2) Swipe up or down or press the [

▲

] or [

▼

] to display the type of reset functions, and then 

press the reset function you want to use.

(3) “Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.” appears. Press 

the [OK] for two seconds to confirm.

The machine will restart.

Note: 

Subdivided reset functions are not available for some models.

Option

Description

▲

Reset the machine.

▼

The machine will exit and cancel the reset menu.

Option

Description

▲

Reboot the machine. The machine will begin the reset.

▼

The machine will exit without rebooting.

Note: 

If you do not reboot your machine, the reset process will not finish and your settings will 
remain unchanged.

Note: 

• The network settings, the security settings and address book data will not be reset by 

the “Machine Reset”.

• If you discard or transfer the machine, we recommend accomplishment of the 

“Factory Reset” to erase the personal data in the machine.

Note: 

You can also reset the Network settings by pressing the 

 [Settings] > [All Settings] 

> [Network] > [Network Reset].

 

 

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands