Brother DCP-L3510CDW, Service Manual

Page: 368 / 430

5-40
Confidential
For models without touch panel
(1) Press the [ ▲ ] or [ ▼ ] in the initial state of maintenance mode to display
“MAINTENANCE 57” on the LCD, and press the [OK]. “IC_ACT ALL” is displayed on the
LCD.
(2) Press the [ ▲ ] or [ ▼ ] to display the toner cartridge to be authorized on the LCD.
If you want to select all colors: “IC_ACT ALL”
If you want to select black: “IC_ACT BLACK”
If you want to select magenta: “IC_ACT MAGENTA”
If you want to select cyan: “IC_ACT CYAN”
If you want to select yellow: “IC_ACT YELLOW”
If you want to select the toner sensor on the machine: “IC_ACT MAIN”
(3) Press the [Start]. Selected toner cartridge will be authorized.
If it is authorized, “IC_ACT OK” is displayed on the LCD.
If the authorization failed, “IC_ACT NG**” is displayed on the LCD.
(** indicates an error number.) Refer to the
<Error display> table on the previous page to
solve it.
(4) Press the [Stop]. The machine returns to the initial state of maintenance mode.
Memo:
When NG was displayed after performing the “IC_ACT ALL”, which color cartridge had
error cannot be determined. In that case, select the color individually and perform.