Brother DCP-L3510CDW, Service Manual

Page: 60 / 430

2-24
Confidential
Error
Codes
Description
Refer
to:
Error
Codes
Description
Refer
to:
9301
When printing from the MP tray, the
MP paper empty sensor detected that
no paper was in the MP tray.
2-89 9A01
An error occurred with the value
measured during auto color registration
performed from the control panel.
2-95
9302
When printing from the T1, the T1
paper feed sensor detected that no
paper was in the T1.
2-90 9A02
Dot counter or develop roller counter
of color toner has reached the upper
limit during auto color registration
performed from the control panel.
2-95
9303 *1 9A03
An error occurred during patch data
printing in auto color registration
performed from the control panel.
2-96
9304 *1 9B01 *1
9305 *1 9B02 *1
9306 *1 9B03 *1
9309
Detected that there was no paper set in all
trays when TrayAuto was selected for printing.
2-90 9B04 *1
9501 *1 9B05 *1
9502 *1 9B06 *1
9503 *1 9C01 *1
9504 *1 9C02 *1
9505 *1 9C03 *1
9601 *1 9C06 *1
9608 *1 9C07 *1
9701
For 2-sided printing, paper size setting of
the printer driver that was not supported
by 2-sided printing was selected.
2-91 9D02 *1
9702
When printing from the T1, the size of
paper specified from the driver set the
size which was not supported by the T1.
2-91 9D03 *1
9703 *1 9D04 *1
9704 *1 9D05 *1
9705 *1 A000
Image processing was not completed
correctly because the number of pixels
required for image processing is insufficient
in the scanned second side data.
2-96
9706 *1 A200
The document scanning position sensor
detected that the document length was 90
cm or more during the one-side scanning.
2-97
9801
An error occurred with the value
measured during color density
adjustment performed from the control
panel.
2-91 A300
The document scanning position
sensor has not detected the document
passing even after the document has
been fed for the specified time.
2-97
9802
Dot counter or develop roller counter of color toner
has reached the upper limit during color density
adjustment performed from the control panel.
2-92 A400
The ADF cover sensor detected that
the ADF cover was open.
2-98
9803
Density patch measurement ended
unsuccessfully during color density
adjustment performed from the control panel.
2-92 A500
When scanning the fax, white or black
correction data for the first side CIS unit was
not within the correct range (first time).
2-98
9804
An error occurred with the value
measured during density sensor
sensitivity calibration.
2-92 A600
When scanning the fax, white or black
correction data for the first side CIS unit was
not within the correct range (second time).
2-98
9901
An error occurred with the value measured
during manual color registration performed
from the control panel.
2-93 A700
Color parameter in the ROM does not
match the first side or second side
CIS.
2-99
9902
Dot counter or develop roller counter of color toner
has reached the upper limit during auto color
registration performed from the control panel.
2-93 A800 *1
9903
An error occurred during patch data
printing in manual color registration
performed from the control panel.
2-94 A900
A scanning error occurred while
processing the scanned image.
2-99