manualshive.com logo in svg

Brother DCP-L3510CDW, Service Manual

Share
Download
Brother DCP-L3510CDW Service Manual Download Page 191

2-155

Confidential

4.14.3 Cannot update firmware

<User Check>

• Make sure that there is no other function running.

• Turn the power switch OFF and then back ON again.

* By the above update procedure, the other models firmware can be updated to the machine. 

Check that the firmware is right and update correctly. If the other models firmware was 
updated by mistake, the machine may repeat power ON/OFF or not powered ON. In such 
case, replace the main PCB. 

4.14.4 “Tray removed” message does not disappear

<User Check>

• Close the tray correctly.

Step

Cause

Remedy

1

Firmware version does not 
match

Reinstall the latest sub firmware and main 
firmware in this order.

2

In case of update failure by 
interruption, the firmware 
might not correctly written in 
the ROM

Update the firmware again by the following 
procedure.* (Touch panel model)
1) Turn OFF the machine.
2) Turn ON the machine while pressing the 

.

3) Double-click the “Filedg32.exe” to start, 

and select “Brother Maintenance USB 
Printer”.

4) Drag and drop the firmware (upd file) in 

the FILEDG32 screen. Update is started.

3

Firmware file has a problem 
during updating with USB 
flash memory

Check if it is firmware of another model, or 
check the number of filename characters and 
its extension.

4

USB flash memory has a 
problem during updating with 
USB flash memory

Replace the USB flash memory.

5

Main PCB failure

Replace the main PCB.

Step

Cause

Remedy

1

Paper feed actuator coming 
off

Reattach the paper feed actuator.

2

Paper feed sensor failure

Replace the paper feed unit.

3

Main PCB failure

Replace the main PCB.

Summary of Contents for DCP-L3510CDW















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands