Brother 882-W80, Operation Manual

Page: 19 / 124

LCD SCREEN
G
etting
Re
ad
y
17
1
■
Embroidery Settings
1
Select the embroidery frame to be used.
2
Select the center point marker or grid lines.
3
Select the thread color display on the embroidery
screen; thread number, color name. (page 77)
4
Select the thread brand of the thread color display.
(page 77)
5
Adjust the maximum embroidery speed (page 77).
6
Adjust the upper thread tension for embroidering
(page 74).
7
Select the height of the embroidery foot during
embroidering (page 55).
8
Select the display units for embroidering (mm/inch).
9
Select the color of the background for the embroidery
display area.
0
Select the color of the background for the thumbnail
area.
A
Select the size of pattern thumbnails.
B
Adjust the distance between the pattern and the basting
stitching. (page 70)
C
Adjust the distance between the appliqué pattern and
the outline (page 70).
D
Adjust the position and brightness of the embroidery foot
“W” with LED pointer (this setting is available if
embroidery foot “W” with LED pointer has been
attached.) (page 59)
■
Wireless LAN Settings
1
Enable/Disable the wireless LAN function (page 20).
2
Shows the connected SSID.
3
Set the machine to connect wireless LAN function.
4
Shows the machine name used on the wireless network.
This name is used when transferring files from the
machine to the embroidery editing software (PE-DESIGN
11).
5
Change the machine name used on the wireless
network.
6
Check the wireless LAN status.
7
Display other menus.
8
Reset network operations.
9
Display the introduction to the application.
■
Setting the [Eco Mode] and the [Shutoff
Support Mode]
You can save the machine power by setting the [Eco
Mode] and the [Shutoff Support Mode].
If you leave the machine turned on without using it for the
set period of time, the machine enters in each mode. Press
to display [Eco Mode] and [Shutoff Support Mode].
(page 16)
[Eco Mode] ;
Machine will enter a sleep mode after the set period of
time. Touch the screen or press the “Start/Stop” button to
continue operating.
[Shutoff Support Mode] ;
Machine will enter the lower power mode after the set
period of time. Turn the machine off and then back on to
restart operating.
1
4
5
6
2
3
7
B
C
8
9
A
D
0
Note
• If you turn off the machine while the machine is in
the [Eco Mode] or the [Shutoff Support Mode], wait
for about 5 seconds before turning on the machine
again.
1
4
5
6
2
3
7
8
9