Brother 882-W80 Operation Manual Download Page 103

Page: 103 / 124

My De

sign C

STIPPLING

101

Press

to convert into embroidery.



When the following message appears, press

Follow the procedure described on “EDITING
PATTERNS” on page 42 to edit the pattern as desired.

Decorative Stitching around a Pattern in
Embroidery (a Quilting Function)

A quilt can be created with stippling stitch around an
embroidery pattern.

Hoop the top layer of fabric in the embroidery frame,
and then attach the frame to the machine.

Press

in the home page screen and select the

pattern that decorative stitching will be added around,

and then press

in the embroidery edit screen.



The outline of the pattern is displayed.

Set the distance and press



A message appears, and the pattern outline is
registered as a stamp shape in My Design Center.

Press .

Memo

• For best results, reduce the embroidery speed.

(page 17)

Summary of Contents for 882-W80





























































































































Search results

Summary of Contents for 882-W80

Reviews:

Related manuals for 882-W80

Brands by name

Popular brands

Brother 882-W80, Operation Manual

Search results

Summary of Contents for 882-W80

Reviews:

Related manuals for 882-W80

Brands by name

Popular brands