Brother 565 User Manual Download Page 109

Page: 109 / 119

G - 3

GLOSSARY

Photo resolution

A resolution setting that uses varying shades of gray for the best

representation of photographs.

Polling

The process of a fax machine calling another fax machine to retrieve

waiting fax messages.

Pulse (Canada only)

A form of rotary dialing on a telephone line.

Remote Activation

Allows you to transfer a fax call, answered at an external or

extension phone, to the fax machine.

Remote Access Code

Your own four-digit code (

---

) that allows you to call and

access the fax machine from a remote location.

Resolution

The number of vertical and horizontal lines per inch. See: Standard,

Fine, Super Fine and Photo.

Ring Delay

The number of rings before the fax machine answers in FAX ONLY and

FAX/TEL modes.

Search

An electronic, alphabetical listing of stored One-Touch, Speed-Dial and

Group numbers.

Speed-Dial

A pre-programmed number for easy dialing. You must press the

Search/Speed Dial

key and then

, two digit code to start the dialing process.

Standard resolution

203 x 98 dpi. It is used for regular size text and quickest

transmission.

Station ID

The stored information that appears on the top of faxed pages. It

includes the sender’s name and fax number.

Super fine resolution

203 x 392 dpi. Best for very small print and line art.

Tone

A form of dialing on the telephone line used for Touch Tone telephones.

Transmission

The process of sending documents over the phone lines from the

fax machine to a receiving fax machine.

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands