Brother 565 User Manual Download Page 73

Page: 73 / 119

7 - 1

QUICK-DIAL NUMBERS AND DIALING OPTIONS

Storing numbers for easy dialing

You can set up the fax machine to do three types of easy dialing: One-Touch,
Speed-Dial and Groups for Broadcasting faxes.

Storing One-Touch Dial numbers

You can store four fax/phone numbers that you can dial by pressing one key.
You can also store names with these numbers. When you press a One-Touch dial
location, the screen displays the name or number as the call is dialed.
(See

One-Touch Dialing

on page 7-5.)

Press

Menu/Set

Press the One-Touch key where you want
to store a number. The screen displays the
location you selected.

Enter a number (up to 20 digits).

Press

Menu/Set

Use the dial pad to enter the name (up to 15
characters).

Press

Menu/Set

. You can use the chart to

help you enter letters. (See

Entering text

on page 4-2.)

—

Press

Menu/Set

, to store the number without a name.

Quick-Dial numbers and

dialing options

If you lose electrical power, the quick-dial numbers that are in the memory will
not be lost.

One-Touch keys are not the dial pad keys. They are the four keys (numbers
1–4) located to the right of the navigation keys.

(USA Only) One-Touch key 1 has been programmed for the Brother fax back
system. You can change it if you want to.

If you want to enter a pause in the dialing sequence (to wait for an “outside
line,” for example), press

Redial/Pause

as you’re entering digits. Pressing

Redial/Pause

enters a 3.5-second pause when the number is dialed, and a

dash appears on the screen.

1.ONE-TOUCH DIAL

NAME:

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands