Brother 565 User Manual Download Page 32

Page: 32 / 119

PAPER

2 - 1

About paper

Handling and using plain paper

■

Store paper in its original packaging, and keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and heat.

Paper capacity of the paper tray

Paper specifications for the paper tray

Paper

Paper Size

Number of sheets

17 lb

23.4 lb

Weight

17 to 23.4 lb (64 to 90 g/m

)

Thickness

0.003 to 0.0039 in. (0.08 to 0.10 mm)

The fax machine can only scan an image 8.2 in. (208 mm) wide, regardless of
how wide the paper is.

Do not use paper:

■

that are extremely shiny or highly textured

■

that were previously printed by a printer

■

that cannot be arranged uniformly when stacked

■

that are made with a short grain

■

that are curled, wrinkled paper, folded, ripped paper, or paper with
staples, paper clips, paste, or tape attached.

■

that are cardboard, newspaper, or fabric.

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands