Brother 565 User Manual Download Page 2

Page: 2 / 119

If you need to call Customer Service

Please complete the following information for future
reference:

Model Number: FAX-565

Serial Number:*

Date of Purchase:

Place of Purchase:

* The serial number is on the back of the unit. Retain

this User’s Guide with your sales receipt as a
permanent record of your purchase, in the event of
theft, fire or warranty service.

Register your product on-line at

www.registermybrother.com

By registering your product with Brother International Corporation, you will be
recorded as the original owner of the product.
Your registration with Brother:

■

may serve as confirmation of the purchase date of your product should you

lose your receipt;

■

may support an insurance claim by you in the event of product loss covered by

insurance; and,

■

will help us notify you of enhancements to your product and special offers.

The most convenient and efficient way to register your new product is on-line at
www.registermybrother.com

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands