Brother 565 User Manual Download Page 64

Page: 64 / 119

SETUP SEND

6 - 6

Manual and automatic fax redial

If you are sending a fax manually and the line is busy, press

Redial/Pause

, and

then press

Fax Start

to try again. If you want to make a second call to the last

number dialed, you can save time by pressing

Redial/Pause

and

Fax Start

Redial/Pause

only works if you dialed from the control panel.

If you are sending a fax automatically

and the line is busy, the fax machine will

automatically redial one time after five minutes.

Canceling a job while scanning, dialing and sending the
original

You can cancel a job while you are scanning it into memory by pressing

Stop/Exit

You can also cancel a job while the fax machine is dialing or sending the original by
pressing

Stop/Exit

Canceling a scheduled job

You can cancel a fax job that is waiting in memory.

Press

Menu/Set

Any jobs that are waiting will appear on the
LCD.

If you have more than two jobs waiting, press

to select the job you

want to cancel.

Press

Menu/Set

—

If you only have one job waiting, go to Step 3.

Press

to cancel.

—

Press

to exit without canceling.

To cancel another job go to Step 2.

Press

Stop/Exit

4.CANCEL JOB

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands