Brother 565 User Manual Download Page 92 | Manualshive

Page: 92 / 119

background image

IMPORTANT INFORMATION

11 - 4

Important safety instructions

1

Read all of these instructions.

2

Save them for later reference.

3

Follow all warnings and instructions marked on the product.

4

Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners. Use a damp cloth for cleaning.

5

Do not use this product near water.

6

Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.

7

Slots and openings in the cabinet and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings
should never be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should never be placed near or over a radiator or
heater. This product should never be placed in a built-in installation unless
proper ventilation is provided.

8

This product should be operated from the type of power source indicated on
the label. If you are not sure of the type of power available, call your dealer or
local power company.

9

This product is equipped with a 3-wire grounding type plug, a plug having a
third (grounding) pin. This plug will fit into only a grounding-type power outlet.
This is a safety feature. If you are unable to insert the plug into the outlet, call
your electrician to replace your obsolete outlet. Do not defeat the purpose of
the grounding-type plug.

10

Do not allow anything to rest on the power cord. Do not place this product
where people can walk on the cord.

11

If an extension cord is used with this product, make sure that the total ampere
ratings on the products plugged into the extension cord do not exceed the
extension cord ampere rating. Also, make sure that the total of all products
plugged into the wall outlet does not exceed 15 amperes (USA only).

12

Do not place anything in front of the fax machine that will block received faxes.
Do not place anything in the path of received faxes.

13

Wait until pages have exited the fax machine before picking them up.

14

Never push objects of any kind into this product through cabinet slots, since
they may touch dangerous voltage points or short out parts resulting in the risk
of fire or electric shock. Never spill liquid of any kind on the product.

15

Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points and/or other risks, and may void
your warranty. Refer all servicing to Authorized Service Personnel. A list of
Authorized Service Centers has been included for your convenience, or you
may contact Brother Customer Service for your nearest Brother Authorized
Service Center. (See

Brother numbers

on page i.)

«
...
90
91
92
93
94
...
»

Summary of Contents for 565
























































































































Reviews:

No comments

Related manuals for 565

Professional 14U12

Brand: Singer Pages: 24

Highlight MERCHANDISER 1RHCC30

Brand: Zero Zone Pages: 53

Brand: Magnum Pages: 32

Brand: Baby Lock Pages: 112

Brand: Consew Pages: 26

Brand: Janome Pages: 46

Brand: Janome Pages: 115

Brand: Rustibus Pages: 31

LAVINA ELITE L30LEU

Brand: Superabrasive Pages: 40

Brand: Yamato Pages: 40

Personal FAX-170

Brand: Brother Pages: 76

Brand: Brother Pages: 37

Brand: Brother Pages: 203

Brand: Brother Pages: 264

Brand: Brother Pages: 93

Brand: Brother Pages: 153

Brand: Brother Pages: 11

Perfect Binder-C1

Brand: Canon Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands