Brother 565 User Manual Download Page 44

Page: 44 / 119

INITIAL SETUP

4 - 5

Setting Volume Amplify

Press

Menu/Set

Press

to select

VOL AMPLIFY:OFF?

if none of the users

are hearing-impaired and go to Step 4.

—

If some or all of the users are hearing-impaired, select

VOL AMPLIFY:ON?

Press

Menu/Set

Press

to select

PERMANENT?

if all the users are

hearing-impaired.

—

Select

TEMPORARY?

if only some of the users are hearing-impaired.

Press

Menu/Set

Press

Stop/Exit

Setting the Ring Volume

You can adjust the ring volume when your machine is idle. You can select a ring
volume level or press until the ring is off.

Press

to adjust the volume level. With each key press, your

machine rings so you can hear the current setting and the screen displays the
setting you are choosing. Each key press changes the volume to the next setting.
The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the

INITIAL SETUP

SETUP RECEIVE

and

SET QUICK-DIAL

plus the

COVERPG SETUP

and

COVERPAGE MSG

(from

SETUP SEND

) operations are stored permanently. You may have to reset the date

and time.

Please carefully read Choosing the Handset Volume (For Volume Amplify),
page 4-4 before you do the following steps:

4.VOLUME AMPLIFY

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands