Brother 565 User Manual Download Page 90 | Manualshive

Page: 90 / 119

background image

IMPORTANT INFORMATION

11 - 2

The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information,
please contact Brother Customer Service. (See

Brother numbers

on page i.) If the

equipment is causing harm to the telephone network, the telephone company may
request that you disconnect the equipment until the problem is resolved.

Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for
information.

If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this equipment does not disable your alarm equipment. If
you have questions about what will disable alarm equipment, call your telephone
company or a qualified installer.

If you are not able to solve a problem with the fax machine, call Brother Customer
Service. (See

Brother numbers

on page i.)

WARNING

For protection against the risk of electrical shock, always disconnect all cables from
the wall outlet before servicing, modifying or installing the equipment.

This equipment may not be used on coin service lines provided by the telephone
company or connected to party lines.

Brother cannot accept any financial or other responsibilities that may be the result
of your use of this information, including direct, special or consequential damages.
There are no warranties extended or granted by this document.

WARNING

Important—About the interface cable

This machine has been certified to comply with FCC standards, which are applied
to the USA only. A grounded plug should be plugged into a grounded AC outlet after
checking the rating of the local power supply for the machine to operate properly and
safely.

Federal Communications Commission (FCC) Declaration
of Conformity (USA only)

Responsible Party:

Brother International Corporation

100 Somerset Corporate Boulevard

Bridgewater, NJ 08807-0911 USA

TEL: (908) 704-1700

«
...
88
89
90
91
92
...
»

Summary of Contents for 565
























































































































Reviews:

No comments

Related manuals for 565

Brand: Jack Pages: 8

Brand: Jack Pages: 10

Brand: Clarke Technology Pages: 54

Brand: Golden wheel Pages: 14

Brand: Lavor Pages: 10

Brand: HIGHLEAD Pages: 39

Brand: Malanbao Pages: 6

Brand: Singer Pages: 109

Brand: JUKI Pages: 116

Brand: Sase Pages: 73

Brand: Philips Pages: 39

Brand: Philips Pages: 73

Brand: Triumph Adler Pages: 110

Brand: Sealey Pages: 2

Brand: Horizon Fitness Pages: 53

Brand: MBM Pages: 45

Brand: Philips Pages: 2

Brand: Tema Telecomunicazioni Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands