Brother 565 User Manual Download Page 79

Page: 79 / 119

7 - 7

QUICK-DIAL NUMBERS AND DIALING OPTIONS

Pause

Press

Redial/Pause

to insert a 3.5-second pause between numbers. If you are

dialing overseas, you can press

Redial/Pause

as many times as needed to

increase the length of the pause.

Hold

Press

Hold/Caller ID

to put a call on Hold.

You can replace the handset without disconnecting the call.

Pick up the fax machine handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.

Fax Redial

If you’re sending a fax manually and the line is busy, press

Redial/Pause

to try

again. Any time you want to make a second call to the last number dialed, press

Redial/Pause

to save time.

If you’re sending a fax automatically and the line is busy, the fax machine will
automatically redial one time five minutes after the transmission.

Tone or Pulse (Canada only)

If you have a Pulse dialing service, but need to send Tone signals (for example, for
telephone banking), follow the instructions below. If you have Touch Tone service,
you will not need this feature to send tone signals.

Lift the handset of an external phone.

Press

. Any digits dialed after this will send tone signals.

When you hang up, the fax machine will return to the Pulse dialing service.

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands