Brother 565 User Manual Download Page 40

Page: 40 / 119

INITIAL SETUP

4 - 1

Getting started

Setting the Date and Time

The fax machine displays the date and time, and if you set up the Station ID it prints on
every fax you send. If there is a power failure, you may have to reset the date and
time. All other settings will not be affected.

Press

Menu/Set

Enter the last two digits of the year.

Press

Menu/Set

Enter two digits for the month.

Press

Menu/Set

(For example, enter 09 for September, or 10 for October.)

Enter two digits for the day.

Press

Menu/Set

(For example, enter 06.)

Enter the time in 24-Hour format.

Press

Menu/Set

(For example, enter 15:25 for 3:25 P.M.)

Press

Stop/Exit

The LCD now shows the date and time you set whenever the fax machine is
in Standby mode.

Initial Setup

1.DATE/TIME

Summary of Contents for 565
























































































































Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands

Brother 565, User Manual

Search results

Summary of Contents for 565

Reviews:

Related manuals for 565

Brands by name

Popular brands